• Industry Webinars

    Upcoming Webinars

    Freedom in a Transformative Era for Vehicles: Rethinking Attachment Solutions With Tapes

    November 30, 2022
    SAE/3M

    Dramatic shifts in the shapes of cars, increased use of sensors, and the popularity of large glass areas on the roof, can be challenging to accommodate with mechanical fasteners. Sealing tape products with enhanced performance and ease of application make them appropriate for attachment scenarios not considered before.

    Supply Chain Security Management with ISO/SAE 21434 Compliance

    November 30, 2022
    Mobex/Karamba

    As demand to meet the ISO/SAE 21434 requirement grows, electric vehicle manufacturers and their suppliers need the tools to understand:

    • Suppliers' security evaluation
    • CIA (cybersecurity interface agreement)
    • Best practices for using supplier evaluation templates

    Radars Used in Autonomous Vehicles are Changing Rapidly. Are You Software Ready?

    December 1, 2022
    Mobex/KPIT

    Advances in hardware technology have enabled complex concepts like imaging radar and digital phase modulated continuous wave (PMCW). Software development must change to complement this hardware technology evolution and leverage these new advances to provide a more dependable automotive radar solution.

    Validating Safety Critical ADAS/AV Systems for Commercial and Off-Highway Vehicles

    December 1, 2022
    dSPACE

    System validation and verification processes, the necessary tools needed to validate advanced sensing technology, and what still needs to be solved to truly reach widespread Level 3-5 operation in commercial-vehicle fleets. The complex implementation of ADAS and Automated Vehicle (AV) software demands a powerful and flexible simulation and testing environment.

    Failure Prediction with Changing EV and AV Mission Profiles

    December 5, 2022
    Mobex/NXP

    Electrification and autonomous vehicles are changing the traditional mission profile, demanding more computation power that requires the latest technology nodes, which all pose unique challenges to functional safety.

    The Internal-Combustion Engine's Next Phase: Innovations and Development Priorities

    December 6, 2022
    SAE/Stanadyne

    Presents the latest innovations and ideas to keep the ICE compliant with ever-tightening global fuel-consumption and emissions regulations, as well as demanding and transitioning customer and commercial-market expectations.

    End-of-Life: A New Beginning in Automotive

    December 6, 2022
    Mobex/Novelis

    How automakers can use collection and sorting technologies to reduce energy consumption and increase their recycled content in vehicles, thereby reducing their overall CO2 manufacturing footprint.

    Safety and Efficiency with Vehicle Motion Control

    December 7, 2022
    SAE/Temposonics

    An overview of linear position sensors and includes an examination of how new motion control systems empowered by magnetostrictive technologies are enabling groundbreaking applications in off-highway vehicles.

    The Rise of Composites in ICE and EV Powertrain Applications and Suspension Mounts

    December 7, 2022
    Mobex/BASF

    Discusses the differences in material behavior when using composites instead of aluminum, also explains how to design using composites with anisotropic properties and how the vehicle NVH performance is affected by replacing aluminum mounts with a composite alternative.

    Gear Up Your EV Battery Test Lab with Scalable, End-to-End Testing

    December 7, 2022
    Charged/NI

    The right approach to test enables you to adapt and scale with your business objectives. It's not about equipment, software, or services, but about the comprehensive set of features like flexibility, openness, and coverage that will set you up for success.

    How to Navigate the Evolving Auto-Technology Landscape

    December 7, 2022
    Automotive News/Microsoft/Ansys

    As connected, automated, shared and electric (CASE) mobility services continue to evolve, the auto industry is facing a massive technology transformation that hinges on data-sharing across different forms of transportation.

    Product Stewardship: How and Why?

    December 13, 2022
    Assembly/Product Stewardship Institute

    How EPR policies and laws can influence design choices and how they can benefit businesses — leveling the playing field for all. How manufacturers can build on EPR principles to better manage products throughout their life cycles to conserve resources, decrease environmental impact, and share the burden of responsibility.

    Design and Simulation of Sustainable, High-Performance Thermal Systems

    December 13, 2022
    SAE/Dassault Systemes

    OEMs today need to navigate multiple regulatory, commercial, technical, and environmental challenges while developing their thermal systems. Explore a modeling and simulation approach to thermal systems development that aims to address current and future needs.

    Emerging Challenges in Automotive Smart Glass Quality

    December 13, 2022
    AutomotiveIQ/Radiant Vision Systems

    Learn about the emergence of adjustable and active glass in automobiles for windshields, sunroofs, and displays. An introduction to different smart glass technologies and various applications, and a detailed case study of the challenges and solutions for inspecting a laser-etched edge-lit smart glass sunroof.

    The User Experience Threshold - Unlocking Mass EV Adoption

    December 14, 2022
    Mobex/Lextant

    In almost every market category, mass EV adoption is lagging behind expectations. While government mandates might increasingly force the issue, widespread preference for EVs can be accelerated by a focus on superior experiences.

    Detecting Concurrency Issues in Automotive Software

    December 14, 2022
    AutomotiveIQ/Code Intelligence

    In the world of automotive security, concurrency issues contribute towards lost updates, inconsistent retrievals and uncommitted data. These errors prove to be particularly dangerous and costly, resulting in multiple recalls.

    mmWave Radar Design for Automotive Applications

    December 15, 2022
    Mobex/Renesas

    Understand the basics of mmWave automotive radar, discover the trade-offs that must be considered during the design process, explore different radar architectures. learn how to implement various radar applications with practical 4D radar detection and imaging radar examples

    The Benefits of Energy Storage for EV Charging

    December 15, 2022
    Charged/FreeWire Technologies

    Most high-powered electric vehicle DC fast chargers require three-phase 480 V input, restricting many possible sites from installing new hardware without costly and time-intensive infrastructure upgrade projects.

    top


    Past Webinars

    Available through November 2023

    How to Successfully Manage Transition to Electrification

    November 2, 2022
    CAR/PwC

    As industry transitions to EV, it's essential for OEMs and suppliersto have short, medium and long term imperatives to manage thetransition. PwC Strategy& will discuss how suppliers can manage thistransition.

    How to Reduce Electric Drive Testing Times by 50%

    November 3, 2022
    Mobex/HBK

    Discusses a method that uses advanced cycle detection to conductreal-time analysis on a “fixed #of cycles”-window rather than a“fixed time”-window like conventional power analyzers to create drive maps in half the time while maintaining the same accuracy.

    Machine Learning for Narrowing the Simulation-Test Gap

    November 4, 2022
    SAE/SmartUQ

    This webinar will focus on statistical calibration, a machinelearning process used to quantify uncertainties (both parameter andmodel form) in simulations as a means for narrowing the simulation - physical test gap.

    How Can the Development of CO2 Emission-Free Combustion EnginesSucceed in Time?

    November 8, 2022
    Mobex/AVL

    There is no question that the internal combustion engine (ICE) canand will continue to play an essential role in future mobility.However, to realize ICEs with zero CO2 and zero-impact pollutantemissions, using new/alternative fuels is critical. Hydrogen ispossibly the most promising alternative fuel solution.

    The Evolution of Documentation: How to Adapt for New Electric and Autonomous Vehicle Requirements

    November 8, 2022
    SAE/Omnex

    Today's documentation needs are evolving beyond the QMS to documentation requirements for embedded software for Automotive SPICE, the ISO 26262 Road Vehicles - Functional Safety standard, and cybersecurity management systems such as the ISO 21434 Automotive Cybersecurity Standard.

    Addressing the Market Demand for Bandwidth and Security with CAN XL

    November 9, 2022
    Mobex/Renesas

    A short introduction to CAN XL and its CANsec security protocol, the motivation behind the new protocol, and provides an overview of the CAN XL specification family with a deeper look at the security extension.

    Electromagnetic Simulations for Automotive Design

    November 9, 2022
    SAE/Dassault Systemes

    This webinar explores how existing 3D models can potentially bereused across multi-disciplinary analysis, includingelectromagnetics, which provides the necessary insight required toaddress modern engineering challenges.

    Zero Emission Transport: Fairy Tale or Realistic Pathway Forward?

    November 10, 2022
    Mobex/AVL

    The energy system is transitioning towards non-fossil sources, and so is the transportation system. However, this transition is global but not synchronized. So, is a genuinely zero-emission world achievable, especially under current boundary conditions? And if so, what is a realistic scenario and time frame?

    Material Choices to Deliver Enhanced Reliability, Performance, andDifferentiation

    November 10, 2022
    SAE/ESI Automotive/MacDermid Alpha Electronics Solutions

    With the increased number of new entrants and changes to thepowertrain, car makers are finding ways to separate themselves fromthe competition, primarily through enhanced electronics.

    NVH Solutions in PU for Increasingly Demanding EV Applications

    November 15, 2022
    Mobex/BASF

    Electric vehicles create new challenges for comfort and dynamics in jounce bumpers, coil-spring-isolators and elastic mounts for chassis, powertrain and interior applications. Market-ready solutions with Cellasto® components that address these challenges by delivering superior noise, vibration and harshness (NVH) optimization.

    Simulation for Sustainable Product Development

    November 15, 2022
    SAE/Automotive Engineering/Ansys

    From clean energy to improving operational efficiency, a myriad oftechnologies is being fast tracked towards meeting low carbontargets. Learn how simulation plays a vital role in realizing thesegoals efficiently through the entire product developmentprocess—coupled with virtual validation.

    Are You Ready for Tomorrow's Automotive Cyber-Attacks?

    November 15, 2022
    Mobex/IBM/Argus Cybersecurity

    Connected cars are quickly becoming the next cyber attack vector, and brand reputation is at risk! In addition, regulations, including UNR 155, require vehicle manufacturers to monitor all threats, vulnerabilities, and cyber-attacks affecting their fleets. However, established enterprise IT security operation centres (SOC) are not optimized to handle the requirements of vehicle fleets.

    Exploring the Importance of Connectivity in an EVs Battery

    November 16, 2022
    Charged/TE Connectivity

    Our TE Connectivity expert will discuss the importance of thebattery within an EV and how connector components have the abilityto make it safer, more efficient, and long lasting.

    How Does Virtualization Address Automotive Safety and Security Concerns

    November 16, 2022
    Mobex/Elektrobit

    Virtualization is a huge topic in the software and automotive industries, but building the foundations and a safe architecture presents many challenges, especially in data security. How EB corbos hypervisor technology provides the foundation for a safe and secure automotive operating system.

    NextGen OTA Updates - Empowering Software-Defined Vehicles from an End-to-End Perspective

    November 16, 2022
    Mobex/ETAS

    Essential end-to-end (E2E) capabilities are needed to manage software-defined vehicles successfully. These include a comprehensive application development framework, a holistic data management service, and new paradigms for over-the-air (OTA) updates.

    Thermal Design, Simulation, and Considerations of an Electric Motor

    November 17, 2022
    Siemens/Maya HTT

    Join this Maya HTT and Siemens webinar for an evaluation of the electromagnetic and thermal performance of an electric motor.

    Driving Student Success with STEM & Career-Connected Learning

    November 17, 2022
    Defined

    learn how one district aligned its STEM and CTE curriculum to boost student outcomes. Administrators will share the steps they took to create a unified team and how they used the Understanding by Design framework to inform their instruction.

    Electric Motor Harmonic Analysis, Tracking, and Measurement

    November 17, 2022
    Mobex/HBK

    Due to the inverter-based excitation and motor construction, thisfundamental frequency will often have a strong presence ofelectrical harmonics, resulting in losses, torque ripple, and othermechanical issues like noise and vibration.

    Software-Defined Vehicle Diagnostics - Keeping the 'Software on Wheels' in Motion

    November 17, 2022
    Mobex/KPIT

    Software-defined vehicles with software-centric integration require new integration workflows, tools and methodologies to manage and maintain them. In traditional control systems, diagnostics events are responsible for detecting malfunctioning sensors or actuators, but diagnostics are not run on the ECU software. With over 300 million lines of software code poised to drive the software-defined vehicle, this surely is a tipping point.

    A Safety Concept for HV/LV Power Converters

    November 21, 2022
    Mobex/NXP

    In the quest for autonomous driving in electric vehicles, system availability will be a crucial constraint, especially for systems involved in power distribution, such as low voltage (12V) generation. Today, fault-tolerant systems, like HV/LV DC/DC converters, are based on full redundancy, but redundant topologies are expensive, oversized and heavy.

    Innovative Polyurethane Solutions for Automotive Sustainability Challenges

    November 22, 2022
    Mobex/Huntsman

    How innovative polyurethane solutions can help automotive manufacturers to reduce their materials carbon footprint. Understand the challenges in assessing and communicating your product's environmental performance, especially when using bio-based or recycled materials as feedstocks.

    How Kinematics and Compliance Testing is Responding to the Automotive Industry's Changing Requirements

    November 23, 2022
    Mobex/AB Dynamics

    Introduces kinematics and compliance (K&C) testing and discusses how K&C test machines are evolving to meet the future needs of the automotive industry, including EV testing and HIL capabilities.

    top

    Available through October 2023

    Building a Safe Electrified Powertrain using MBSE

    October 6, 2022
    AutomotiveIQ/Ansys

    By leveraging integrated, multidisciplinary engineering simulation tools for battery design and BMS, the optimal combination of safety, energy density, and battery life can be achieved.

    Physical Layer Testing Challenges of High-Speed In-Vehicle Networks

    October 6, 2022
    Mobex/Keysight Technologies

    The expert will provide unique insight into how new ADAS and autonomous driving applications such as sensors, high-resolution displays, cameras, and connected cars, are met with new standards with data rates far beyond anything ever attempted in the hostile automotive environment.

    Everything You Need to Know About Virtual ECU Abstraction Levels

    October 12, 2022
    SAE/Synopsys

    The simulation of electronic control units (ECUs) as virtual ECUs (vECUs) has found rapid adoption in several phases of automotive development. This webinar will provide a greater understanding of the vECU levels and how to apply them, as well as how vECUs are helping solve current and future software test challenges.

    Seven Must Have Features for Your Analytics Platform

    October 17, 2022
    Charged/Principal Solutions

    Learn about the top 7 considerations best-in-class companies use when investing in an analytics platform and how applying them is helping large automakers achieve zero blind spots with their data and not hindering progress due to lack of insight into their data.

    Stop vs Delay: Designing a Thermal Runaway Prevention Strategy

    October 18, 2022
    SAE/Aspen Aerogels Inc

    Battery engineers are tasked with designing a thermal propagation solution that optimizes a vehicle's performance and meets critical safety requirements. This webinar discusses the ways in which aerogel-based thermal barrier materials can help achieve these goals—and do so within realistic space, weight, and cost constraints.

    3D Printing for EVs: Addressing Accelerated EV Timelines with Additive Manufacturing

    October 18, 2022
    Automotive News/HP 3D Printing

    Automotive experts explain how 3D printing, also known as additive manufacturing, can shorten product-development cycles, generate lighter-weight components and produce Class A finished parts.

    Achieving First Time Right in Electric Powertrain Systems using Model-Based System Engineering

    October 19, 2022
    Mobex/KPIT

    The transition to the software-defined vehicle is causing a significant increase in system and subsystem architecture complexity. There has also been a substantial reduction in time to market, and compliance with standards like ISO26262 and ASPICE has become increasingly critical.

    EV Battery Testing – How to Improve the Design and Operation of Your Lab

    October 19, 2022
    Mobex/Keysight Technologies

    The intensive testing of electric vehicle (EV) batteries is crucial to the evolution of e-mobility solutions. EV manufacturers, suppliers and test facilities must make the best use of their battery test lab to ensure fast development.

    The Economic Impacts of International Automakers in America

    October 20, 2022
    CAR/Autos Drive America/AIADA

    Each year, Autos Drive America and the American International Automobile Dealers Association (AIADA) compile an economic impact report to highlight international automakers and nameplate dealers' positive impact in the U.S. The latest report shows international automakers and nameplate dealers in the U.S. continued driving the American economy forward, just like it has for the past 60 years.

    Using Virtual Modeling-Simulation to Avoid Information Breakdown

    October 20, 2022
    SAE/Dassault Systemes

    Presents a Modeling-Simulation approach to assure the information connectivity necessary to enhance the capability to creatively reduce risk in the development of complex, multi-domain systems.

    Carbon-Free Hydrogen Powertrains for Passenger Car and Commercial Vehicle ICEs

    October 25, 2022
    Mobex/AVL

    Experts from AVL will discuss the layout of hydrogen engines in passenger car and commercial applications, focusing on hybrid solutions for high-efficiency passenger car powertrains.

    Innovative Materials for ADAS Challenges

    October 25, 2022
    SAE/DuPont

    4D radar systems will bring additional challenges including higher RF reflection and ghost signals. This technical webinar presents innovative, durable, and dependable engineering polymer solutions to meet OEM requirements for radar and camera technology components.

    Critical Sealing and Thermal Interface Material Solutions for Battery Systems

    October 26, 2022
    Mobex/Datwyler

    Discuss innovations in new mobility battery applications, from critical sealing solutions to effective thermal management.

    The Benefits of Advanced Methodologies in Battery Electric Vehicle Development and Validation

    October 27, 2022
    Mobex/AVL

    AVL's Marijn Hollander and Morgan LeCossec will explain the benefits of advanced methodologies for E-Drive powertrain development using AVL CAMEO.

    Optimizing Power Converters: How Simulation Helps You Engineer Best-in-Class Power Electronics

    October 27, 2022
    SAE/Gamma Technologies

    Power converter design requires engineers to understand and analyze how integrated system requirements are met when making electrical subsystem design choices. This webinar will walk through an integrated, communicative approach to design decisions for power electronics cooling and subsystem design.

    Overcoming Control Challenges in Emerging Motor and Inverter Technologies with Specialized HIL Systems

    October 27, 2022
    Mobex/Drive System Design

    DSD's Jason Schneider and AK Arafat will walk through the processes and tools used to develop cutting-edge motor control strategies, blending simulation and conventional physical testing.

    top

    Available through September 2023

    Autonomous Vehicles - The Road to Radar Manufacturing Success

    September 6, 2022
    Mobex/Keysight Technologies

    Automakers are investing heavily toward developing and deploying highly automated vehicles, with high resolution 4D imaging radar leveraging Multiple-Input Multiple-Output (MIMO) wireless technology. This webinar, explains how this evolution will change the game for radar manufacturers.

    How to Increase Productivity in EV Design by Leveraging Thermal Simulation

    September 7, 2022
    SAE/Gamma Technologies

    Critical systems, such as battery packs and integrated motors, require proper cooling to meet performance and range requirements. With the increasing scope of model capabilities comes the need for quick and efficient editing capabilities within the boundary conditions and test cases for multiple parties' needs.

    Innovative Coolant Solutions for Future Electric Vehicle Applications

    September 8, 2022
    Mobex/BASF

    With ongoing developments in electric vehicle technologies for the future, the requirements for cooling solutions are shifting. This webinar presents a new coolant product family for electric vehicle applications designed to meet and exceed all essential requirements in safety, performance, and lifetime of the respective powertrain technologies.

    Optimizing Electric Vehicle Range - Technologies and Techniques

    September 13, 2022
    Mobex/MathWorks

    In this round-table discussion led by MathWorks, a panel of industry experts discuss the requirements, technologies, and challenges in developing electric vehicles to meet the needs of diverse automotive applications, and how simulation is a core tool in optimizing designs for the whole life of the vehicles.

    Moving Vehicle Safety Function Testing into the Lab

    September 14, 2022
    Mobex/Keysight Technologies

    The cost of developing prototype vehicles can stretch to US$1m, so there is a strong business case for moving as much testing into the lab as possible. This webinar presents a novel approach to providing a dynamic, high-fidelity reflection environment for radar sensors, enabling accurate testing of functions like Automated Emergency Braking (AEB) and Adaptive Cruise Control (ACC).

    Building the AI/ML Data Autobahn for ADAS/AV Development

    September 14, 2022
    SAE/Dell Technologies

    ADAS/AV data systems face three important challenges: movement and management of terabytes to exabytes of data; massively parallel, complex data streams, including images, videos, LiDAR, radar, and vehicle data; and data silos created by data globally dispersed across hybrid infrastructure and geopolitical barriers.

    The Road to a 10-Minute Recharge

    September 21, 2022
    Charged/TE Connectivity

    With vehicle electrification on the rise, there is a strong demand to safely deliver more charging power in less time. This brings technical challenges, like more heat and component stress within the vehicle from the charging inlet to the battery.

    Expandable Epoxy Adhesives Improve Traditional Bonds and Enable Composite Design Performance

    September 22, 2022
    SAE/DuPont

    Highly toughened, expandable structural adhesives enhance the structural performance of the vehicle with minimal weight penalty and provide superior joint quality with better adhesion in areas difficult to bond, and have been successfully implemented to reinforce roof structures, panoramic roofs, and body structures to improve crashworthiness.

    Efficient Thermal Runaway Modeling for Sensitivity, Parametric, and Variability Analysis

    September 26, 2022
    SAE/UL Research Institutes

    The complexity of the physics involved and the variability associated with thermal runaway make it very challenging to model. This work aims to develop a systematically reduced thermal runaway modeling framework to conduct sensitivity, parametric, and variability analysis. Such a framework must be computationally efficient while considering the effects of various physics involved.

    Model-Based Software Development and Validation: Speeding Up the Product Cycle with Decreased Iteration

    September 26, 2022
    Mobex/Elektrobit

    Automotive testing and validation require complex features, variants, and markets to be considered to ensure high quality and minimized risk and costs.

    Efficient Design Systems for Hyper-Fast DC Charging Systems

    September 27, 2022
    Automotive IQ/Infineon/EBV Elektronik

    High-power DC charging systems are the answer to the electric vehicle (EV) charging industry's need for more range and reliable infrastructure. Design Engineers are increasing the demand for flexible and efficient design systems to accelerate their DC EV charging projects.

    Finding the Perfect Trade-Off for Electric Vehicle Chassis Engineering

    September 27, 2022
    Siemens

    This webinar focuses on the challenges of electric vehicle chassis engineering and how to anticipate these. It discusses how to find the perfect trade-off between ride, handling, and comfort while considering energy optimization, NVH, and durability.

    Accelerate Your DC EV Charging Projects

    September 27, 2022
    AutomotiveIQ/Infineon Technologies/EBV Elektronik

    Learn how a modular reference design platform for DC EV charging systems can enable the flexibility to pick what you need to speed up your individual designs.

    NNG iGO.Live and Widesense: Driving Value Generation for Automakers with Hybrid Navigation for EVs

    September 28, 2022
    Mobex/NNG

    Reducing time to market, lowering infrastructure and operational costs, and creating EV-first guidance and routing solutions are critical challenges that, when overcome, can create exceptional driving experiences and real value for automakers.

    The Pathways to Sustainable Electric Motor Design – Part Two

    September 28, 2022
    Mobex/Drive System Design

    In this second part of DSD's webinar series on motor design, Tirhas Kelati and Paul Sims further explore the company's viewpoint and approach to the engineering of sustainable eMachines.

    Conformance and Interoperability Tests for Electric Vehicles and Charging Infrastructure

    September 28, 2022
    Mobex/Keysight Technologies

    Electric vehicle (EV) manufacturers and suppliers are striving to reach that magical tipping point where range, charging time, availability, safety, and affordability come together to accelerate the development of EVs.

    Safe and Predictable Automated Driving with Location Technology

    September 29, 2022
    Mobex/Here Technologies

    As automotive and transportation industries gradually introduce automated driving, this webinar explores why accurate digital twins of real-world environments are essential in achieving reliable localization, path planning, and simulation.

    top

    Available through August 2023

    Grow and Retain Technicians by Providing Careers, Not Just Jobs

    August 2, 2022
    Automotive News/CDK Global

    Dealers have always struggled to find quality service technicians, but they now feel the impact of staffing shortages more than ever before. So how do you attract and retain good service technicians? What you can do to turn service jobs into careers and keep the best talent.

    The Role of the Battery Management System in ISO/SAE 21434 Compliance

    August 3, 2022
    Mobex/Karamba Security

    Why is the BMS so important for ISO/SAE 21434 compliance? What are the cyber risks that must be addressed? Which BMS cyber risks are relevant for your organization? A complete overview of TARA and Pen testing for the BMS.

    The Role of Pressure-Sensitive Adhesives in the Electric Vehicle Battery Pack

    August 9, 2022
    SAE/Avery Dennison

    Design trends and engineering challenges are driving interest in bonding solutions for EV battery pack materials. These solutions include high-performance, pressure-sensitive adhesives. Such tapes provide effective bonding, and help address issues related to flame retardancy, boosting dielectric strength and protecting pack materials.

    The High-Impact Automotive Cybersecurity Trends and Incidents of H1 2022

    August 10, 2022
    Mobex/Upstream

    Three emerging cyber threats and their potential impact on end users, OEMs, and the entire smart mobility ecosystem.

    The Trends and Impacts on After Sales and Service Deliverables in the Automotive Industry

    August 24, 2022
    Siemens

    The growing electrification and automation of vehicles will extensively affect vehicle servicing and maintenance. Electric motors and batteries replace internal combustion engines, requiring special care due to the extremely high voltages at which they operate. Automated vehicle systems demand higher levels of technician training due to their complexity and criticality to the safety of passengers.

    Next-Generation Vehicle Diagnostics Development - Is Your Organization Ready to Cruise the Fast Lane?

    August 25, 2022
    Mobex/KPIT

    Even though OEMs realize the need to standardize data and align their development strategies with industry-defined standards such as ODX and DEXT, most still utilize legacy or vendor-specified development frameworks. The lack of standards-driven development poses significant challenges to the economics and reliability indices of their vehicle programs.

    Exploring the Future of Innovation with Toyota Ventures

    August 29, 2022
    CAR/Toyota Ventures

    As the mobility landscape continues to evolve, automakers are seeking new technologies to improve their product portfolios and manufacturing processes, as well as achieve carbon neutrality. Corporate venture capital has emerged as a critical tool to find new innovations.

    top

    Available through July 2023

    Faster 5G TCU Testing for Autonomous Vehicle Applications

    July 13, 2022
    Mobex/Keysight Technologies

    The ecosystem of chipset and NAD makers, TCU manufacturers, OEMs, and network operators is accelerating the autonomous vehicle dream by rolling out 5G. This webinar reviews the test requirements and speed optimized test methodologies for volume manufacturing and delivers a teaser demonstration.

    How Electrification is Transforming Automotive Ride and Handling Development

    July 13, 2022
    Mobex/VI-grade

    New development workflows are needed to address the challenges of electronic driving controls and assistance systems in electric vehicles. This trend is effecting significant change in the ride and handling development process, presenting development engineers with new challenges.

    Vehicle Engineering for Efficient Electric Vehicles

    July 19, 2022
    Siemens

    Discusses leveraging a digital twin for light-weighting, cabin comfort, and attribute balancing for efficient electric vehicles.

    Electric Vehicles: New Drive Systems, Persistent Cyber Threats

    July 20, 2022
    Mobex/Upstream

    Changing landscape: how EVs and ICEs differ in cybersecurity. Emerging threats: unique attack vectors due to the rise of EVs. Impact on end-users: the potential for attackers to manipulate EV systems and architecture. The future: “secure by design” and what trends are right around the corner?

    Automotive Trends and Strategy

    July 21, 2022
    Reuters/Here

    From the journey towards building fully autonomous vehicles ready for city roads, developing electric vehicles and its associated charging infrastructure to creating shared mobility solutions with sustainability at its core – the automotive industry is entering a decade of transformation.

    Automotive Cybersecurity: A New Dimension of Processes and Product

    July 21, 2022
    Mobex/Method Park

    Discusses modern automotive cybersecurity challenges and explains how OEMs and suppliers can overcome them to prepare for the evolving cybersecurity process landscape.

    How Pressure-Sensitive Adhesives Enable Advanced EV Battery Designs

    July 27, 2022
    Charged/Avery

    New and effective bonding solutions for EV battery pack materials include high-performance tapes featuring pressure-sensitive adhesives. Such tapes provide not only effective bonding, but help address issues related to flame retardancy, boosting dielectric and protecting pack materials.

    The Pathways to Sustainable Electric Motor Design – Part One

    July 27, 2022
    Mobex/Drive System Design

    Rather than fast-forwarding to discussing zero rare-earth designs, the focus is on the roadmap of sustainability; looking at alternative or derivative motor technologies, materials, manufacturing techniques, optimization processes and complementary sub-systems.

    Electric Vehicle Transmisison Design Priorities: Driveline to Transmission

    July 28, 2022
    SAE/Dana/Amsted Automotive/Schaeffler

    Presents unique engineering solutions, strategies, and concepts to enhance EV propulsion and help OEMs and suppliers better differentiate EVs to the rapidly expanding global consumer base.

    Using CAN Bus Integration to Accelerate Electric Motor Testing

    July 28, 2022
    Mobex/HBK

    Electric motor performance testing is often long and repetitive, requiring hundreds or even thousands of small changes to characterize the DUT. This type of testing lends itself to the automation of the test and the measurement system.

    top

    Available through June 2023

    Lighting the Way for Headlamp Innovation

    June 1, 2022
    Automotive IQ/Ansys

    By leveraging simulation, the design of intelligent headlamps and verification of their performance can be done in a virtual environment – saving significant time, costs, and manual labor from the end-to-end development cycle.

    Spot Joining for Light-Weight Materials in Body Structure Assembly

    June 1, 2022
    Mobex/Alumobility

    Experts from Alumobility demonstrate the value-in-use and performance of joining scenarios for aluminum-intensive vehicles.

    How to Achieve Power Grid Separation in Autonomous Vehicle Topologies

    June 2, 2022
    SAE/Eberspaecher Automotive Controls

    As autonomous functionality grows within the automotive industry, vehicle architectures are becoming increasingly more complex. It is essential to have redundant and safe power management to ensure all critical devices are operational.

    Detecting and Modelling Defect Structures in Electric Vehicle Battery Cells

    June 7, 2022
    Mobex/Keysight Technologies

    Gain insight into new methods for early detection of defect structures in battery cells, including high voltage separator defect detection, electrochemical impedance spectroscopy, and direct self-discharge measurement.

    From Virtual ECU to Real Vehicle: Continuous Testing of Functional Requirements

    June 8, 2022
    SAE/Synopsys

    Presents a flow for seamless testing of functional requirements throughout the entire development process using a Requirement Modelling Language test suite representing an executable test specification that can be applied to both the virtual domain and the real vehicle.

    SDA and the Connected Car - Creating Freedom from Hardware-Specific Software Stacks

    June 8, 2022
    Mobex/Open Synergy

    How automakers can free themselves from hardware-specific software stacks and supplier lock-in by switching to Software-Defined Architecture.

    The Hidden World of the Composite Chassis

    June 8, 2022
    Mobex/BASF

    Explains the benefits of using composite chassis solutions in modern vehicles, especially when developing electric vehicle architectures.

    Get Even More Out of Your EVs with Thermoplastics

    June 9, 2022
    SAE/DuPont

    Topics include a new technology to manage tab cooling on EV batteries,thermoplastics that can withstand heat shocks for use on bus bars, and how engineering polymers can help solve xEV battery engineering concerns.

    Get Involved with Drone Safety Day

    June 10, 2022
    NSF/NCAT/FAA

    Learn more about Drone Safety Day and how you can get involved! Topic areas for 2022 are education, equity, economics, emergencies, and environment. Don't miss a chance to interact with our guests from NCAT and FAA during this exciting and interactive session.

    Efficient and Secure V2X PKI Integration with a Global Harmonized Solution

    June 13, 2022
    Mobex/ETAS

    While automotive OEMs are working toward realizing V2X functionality to advance safety for road users, the challenges of having efficient and globally harmonized V2X PKI services remains a concern.

    Detecting and Modelling Defect Structures in Electric Vehicle Battery Cells

    June 14, 2022
    Mobex/Keysight

    Various defects can appear in an electric vehicle battery cell, introduced by material or process problems, assembly issues, and formation. This webinar present several new technologies for detecting and modelling defect structures to increase cell quality and higher manufacturing yield.

    Necessary Communication Protocols to Support High-Performance Compute Automotive Architectures

    June 15, 2022
    SAE/Elektrobit

    Whether it's electric vehicles, autonomous driving applications, or connectivity to the cloud, more data in the vehicle means communication protocols play an increasingly critical role in new architectures.

    Reducing BEV and xHEV Development Times with Highly Efficient System Testing

    June 15, 2022
    Mobex/AVL

    Experts from AVL explain how to overcome the most significant e-Axle, powertrain, and vehicle testing challenges and shorten development time.

    EV Battery & Electrification Testing - From the Grid to the Road

    June 16, 2022
    SAE/Keysight Technologies

    Electric vehicles (EVs) are driving the future of the automotive industry. Success in this fast-paced, high-voltage, high-power transition to EVs requires readily available, safe, flexible, and accurate test equipment.

    Sustainable Electrified Transportation and Mobility

    June 21, 2022
    SAE/Dassault Systemes

    Transportation is the world's fastest growing source of energy-related carbon emissions, accounting for 17 percent of global greenhouse gas emissions in 2021. Electrification of transportation and mobility are essential to a clean-energy future.

    Simplify & Streamline Development of ISO 26262 Compliant Automotive SoCs

    June 22, 2022
    SAE/Synopsys

    Standards such as ISO 26262 define strict requirements, processes, and methods that all stakeholders – IP vendors, sub-system developers, and semiconductor SoC and system developers – must abide by when designing safety-critical automotive products.

    Automated Driving for Short- and Long-Haul Trucking: Are Drivers Really Yesterday's News?

    June 23, 2022
    SAE/Plus/dSPACE/FEV.io

    Widespread SAE Level 4 and 5 operation in commercial vehicles may be a little further in the future than originally promised, but that has neither slowed nor diminished the industry's development and testing efforts.

    Vehicle Electrification Manufacturing Engineering and Operations

    June 23, 2022
    Siemens

    Consumer desire, changing governmental regulations, and technology innovations are just some factors accelerating the progress of vehicle electrification. Electric vehicles (EVs) have also become a catalyst for new players to enter this space.

    Using GIT for PLC Workflows: New Approaches

    June 28, 2022
    SAE/Copia

    Until now, code development for industrial automation has not been able to take advantage of modern DevOps processes that have transformed traditional software development, due to the visual nature of PLC programming and the variety of development environments.

    Securing Modern Vehicle with AUTOSAR

    June 28, 2022
    Mobex/ETAS

    Explains how AUTOSAR offers a way to implement a multi-level security approach by providing standardized security building blocks that can be used off the shelf.

    Innovating with the FMEA: AI, Machine Learning, and More

    June 29, 2022
    SAE/Omnex

    The recent AIAG-VDA FMEA and SAE J1739 publications introduce significant and innovative changes to FMEA methodology, enhanced further with the introduction of multipoint FMEAs and the use of AI in FMEAs.

    Transforming the Automotive Industry with Innovative Hardware and Intelligent Software

    June 29, 2022
    Mobex/Elektrobit

    How innovative hardware solutions and intelligent software can jointly deal with the challenges posed by emerging trends.

    top

    Available through May 2023

    Modeling and Virtual Twin Simulation to Ease Collaboration in Automotive Industry

    May 4, 2022
    CAR/Foriva

    Automotive cockpits are becoming increasingly intelligent and complex. Forvia's mission is to create holistic systems in which all its key products interact together to improve the user experience and HMI.

    How to Manage Secure Resource Sharing on Next-Generation E/E Architectures

    May 4, 20202
    Mobex/ETAS

    When using a microcontroller hypervisor as an integration platform for next-generation E/E architecture, an essential consideration is sharing the HSM without compromising security and performance requirements.

    Webinar Series: Next-Generation Smart Manufacturing

    Supply Chain Planning and Logistics for EV Manufacturing

    May 10, 2022
    SAE/Siemens

    The challenges in EV manufacturing initiatives are explored in these six sessions on manufacturing trends to address electrification, additive manufacturing, intelligent supply chain, and operational excellence.

    The Software Defined Vehicle

    May 12, 2022
    AEye

    The future of vehicle architecture is very much trending towards becoming software focused. Introducing agile methodology will accelerate continuous software development and encourage OEMs towards large scale deployment of software.

    Holistic Design of an ePowertrain System

    May 12, 2022
    Automotive IQ/Hexagon

    Effective strategies to optimize ePowertrain design from system requirements to key components integration and accelerate time to market using CAE.

    ADAS/AD Sensor Validation: Reproducible Indoor Testing Versus Real-World Outdoor Testin with Ground Truth

    May 12, 2022
    Mobex/AVL

    An innovative ADAS / autonomous driving (AD) sensor testing facility for weather conditions like rain, fog, and light and explain the importance of sensor calibration for accurate ground truth reference data in real-world sensor testing.

    Driving Interconnection System Reliability to Meet New Drivetrain Electrification Demands

    May 17, 2022
    SAE/TE Connectivity

    Addresses not only challenges faced by manufacturers but also new approaches that can be taken with press-fit technology, as well as single pin insertion and the connector seating equipment required for proper termination.

    Use of Capacitors in Series-Parallel Configuration for Wireless Resonant Circuits

    May 18, 2022
    Charged

    Wireless Power Transfer circuits demand stable high capacitance, high voltage capacitors to act as the tank capacitor in the LC resonant circuit. Multi-Layer Ceramic Capacitors (MLCCs) are increasingly used for this application but there are caveats that need to be followed to achieve reliable operation.

    Mastering Precise Vehicle Positioning for Autonomous Driving Applications

    May 19, 2022
    Mobex/Elektrobit

    Vehicle positioning is a prominent feature in classic navigation applications. However, this feature needs to meet many more demands in modern automotive systems.

    Next-Generation Design for Automotive and Transportation

    May 19, 2022
    Automotive News/Siemens

    The automotive industry is changing faster than ever as electrification, connectivity, autonomous driving and lightweight construction eliminate old design paradigms. Are the tools you're using to design vehicles and components ready for this? If not, you need a next-generation design solution.

    Battery Testing is not as Simple as" Test a Battery"

    May 20, 2022
    Automotive News/ATS

    Tackling the EV-battery revolution while ensuring product quality is challenging. Battery testing is not as simple as just “testing a battery.” Form factors, design elements and systems are subject to change – they're not fixed in time.

    Webinar Series: Next-Generation Smart Manufacturing

    Intelligent Operational Excellence in EV Manufacturing

    May 24, 2022
    SAE/Siemens

    The challenges in EV manufacturing initiatives are explored in these six sessions on manufacturing trends to address electrification, additive manufacturing, intelligent supply chain, and operational excellence.

    Certifiable Solutions for Automotive Software Processes and Certification

    May 24, 2022
    Mobex/Tuxera

    Automotive software must be dependable in harsh environments. MISRA C provides a high design standard to reduce bugs in development code; automotive SPICE (ASPICE) defines a process to track every line of code from requirements to the individual test which validates that line.

    Engaging the Data Driven Edge

    May 25, 2022
    CAR/Aerospike

    how to position data and even TBs of information at the edge to give AI and Applications the ability to make real-time decisions in microseconds.

    Hardware-in-the-Loop Testing for Cost-Efficient ECU Validation

    May 25, 2022
    Mobex/VI-grade

    Explains how to enhance the system engineering process for vehicle development using an HiL solution for automotive applications.

    Understanding Fluid Systems Testing for Current and Future Technologies

    May 25, 2022
    SAE/Element

    An overview of the many tests that automotive fluid systems – such as radiators, hydraulic systems, and battery cooling systems – can be subjected to in laboratories and discusses why this type of testing is valuable to manufacturers.

    Data Orchestration and Smart Ingest for Autonomous Development: An Overview and Demo

    May 26, 2022
    SAE/Dell/Elektrobit

    This on-prem and cloud-friendly solution enables design teams to filter data at the edge, before and during ingestion, and automatically tier data storage, drastically reducing the amount of time spent by engineers, data scientists, and algorithm developers to search, use, and manage ADAS/AD test data.

    top

    Available through April 2023

    Webinar Series: Next-Generation Smart Manufacturing

    Lightweighting for EV Manufacturing: Design and Validation

    April 5, 2022
    SAE/Siemens

    The challenges in EV manufacturing initiatives are explored in these six sessions on manufacturing trends to address electrification, additive manufacturing, intelligent supply chain, and operational excellence.

    Two Demands for Semiconductor Design Expertise

    April 6, 2022
    CAR/HCL

    Automotive OEMs and suppliers need comprehensive expertise in semiconductor design and development, to find ways to apply more flexibility in the application of chips using designs that are available in the market today.

    System Engineering for Highly Automated Driving - The Safety Directed Design Approach Towards Architecture Definition

    April 6, 2022
    Mobex/KPIT

    Discusses the critical considerations and approach for building a robust system for automated driving through a system engineering methodology to develop safety directed architecture.

    LiDAR's Newest Tricks

    April 7, 2022
    SAE/iSYSTEM

    LiDAR sensing is a vital aspect of engineering a robust sensor suite. This webinar examines the latest developments in LiDAR technology that will help advance the capabilities of onboard vehicle sensing.

    Precise Location Systems and the Future of ADAS

    April 12, 2022
    Mobex/Quectel

    Precise location data integrates and provides a key ingredient in ADAS and self-driving systems. Examines the components of the overall precise location system and the various flavours of precise location available on the market today.

    Transform EV Design and Development Through Pervasive Engineering Simulation

    April 12, 2022
    SAE/Ansys

    Examines how several OEMs and major suppliers have made progress in their electrification journey using powerful and comprehensive simulation engineering software.

    Webinar Series: Next-Generation Smart Manufacturing

    Lightweighting for EV Manufacturing: Materials Management and Manufacturing

    April 13, 2022
    SAE/Siemens

    The challenges in EV manufacturing initiatives are explored in these six sessions on manufacturing trends to address electrification, additive manufacturing, intelligent supply chain, and operational excellence.

    An Optimized Approach to Battery Pack Development

    April 13, 2022
    Mobex/MAHLE

    Battery system development is now a major focus area across the automotive industry. Optimizing this complex process is essential for the successful delivery of all new electric and hybrid vehicle programmes.

    Smart Charging and Roaming Framework for Electric Mobility

    April 13, 2022
    Mobex/Sasken

    How the charging infrastructure players and OEMs with dedicated charging networks can use a modular and adaptable framework to facilitate smart charging and EV roaming.

    Leveraging a VI-Grade DESKTOP Simulator into Your System Engineering Process

    April 14, 2022
    Mobex/VI-grade

    Explains how the company's entry-level DESKTOP simulator can be a powerful addition to the system engineering process for vehicle development.

    How to Achieve Fast, Flexible, and Secure In-Vehicle Communication for Next-Generation Vehicles

    April 20, 2022
    Mobex/Elektrobit

    How to fully utilize hardware capabilities to help cope with the new demands on software solutions for new zonal architectures and create faster and more efficient and secure networking within a car.

    Creating a Trusted Agile Process for the Safe Deployment of Automotive Innovation

    April 21, 2022
    Mobex/Method Park

    The importance of a trusted and agile process in keeping up with the pace of automotive innovation.

    Green Goals Driving the Automotive Industry's New Era of Sustainablity

    April 22, 2022
    CAR/Altair

    Join the Altair Enlighten Award for a roundtable discussion to learn about the program's success in promoting innovation to develop award-winning technology solutions that have significantly advanced sustainability initiatives.

    Electronic Horizon for ISA and ADAS in Commercial Vehicles

    April 26, 2022
    Mobix/Elektrobit

    How to solve Intelligent Speed Assistance (ISA) customer pain points and outline the benefits of using map data and the electronic horizon platform for ISA.

    Smart Urban Mobility: See Who's Really Driving?

    April 27, 2022
    CAR/Unicepta

    The world's major cities have set out to leverage new technologies to realize their vision of a more sustainable future, it's cities for humans first, and vehicles (only where necessary) second.

    Making Use of Connected Car Data - Reducing Warranty Costs and Improving Uptime

    April 27, 2022
    Mobex/AVL

    Explains how the application of cutting-edge data science methodologies benefits OEMs and their suppliers by predicting vehicle and component failures and minimizing downtime.

    Developing Displays and Human Machine Interfaces for Electric Vehicles

    April 28, 2022
    SAE/Boyd

    Covers the wide range of engineered material components and stack-ups as well as the design considerations that go into developing high-reliability EV displays, dashboards, and next-generation human machine interface (HMI) consoles.

    Power GaN as a Technology of Choice for Volume EV Applications

    April 28, 2022
    Charged/Nexperia

    How Nexperia addresses one of the main applications for GaN in EVs, the on-board charger, and a glimpse into Nexperia's future developments, product offerings, and plans to support the increasing demand of GaN products

    top

    Available through March 2023

    Webinar Series: Next-Generation Smart Manufacturing

    Next-Generation Smart Manufacturing for Electric Vehicles

    March 2, 2022
    SAE/Siemens

    The many challenges in EV manufacturing initiatives are explored in this webinar series, which consists of six sessions on topics that examine manufacturing trends to address electrification, additive manufacturing, intelligent supply chain, and operational excellence.

    Test Systems for Brake Emissions Regulation Compliance

    March 9, 2022
    Mobex/AVL

    A test system that combines particulate emission measurement techniques and testing equipment competencies to help stakeholders adhere to these new brake wear emissions regulations.

    Battery Systems Simulation for Advanced Thermal Management

    March 9, 2022
    Mobex/Mahle

    The modelling and simulation of battery packs and their control systems are essential at the early stages of electric and hybrid vehicle development projects.

    Using ST Stellar MCU Virtual Prototypes to Deliver Next-Generation Software-Defined Vehicles

    March 16, 2022
    SAE/Synopsys

    An overview of ST Stellar Integration MCU architectures and application domains, explores how virtual prototypes enable the supply chain, and includes a discussion on their benefits

    Silencing the Future: DSD's Approach to Electrified Powertrain NVG

    March 16, 2022
    Mobex/Drive System Design

    How the influence of the E-machine, inverter, and gearbox, and the interactions between them, can impact noise, vibration, and harshness (NVH) performance.

    Advanced Motor and Drive Analysis

    March 17, 2022
    SAE/Yokogawa Test & Measurement

    How to get past ground-level measurements and delve into comprehensive solutions that leverage test and measurement instruments including power analyzers, high-speed data acquisition, and real-time software.

    Digital Transformation Trends in Automotive with IBM and Celonis

    March 17, 2022
    Automotive News/Celonis/IBM

    Learn how emerging technologies like process mining and automation deliver value for auto companies. We will discuss case studies of what industry leaders are doing to combat supply chain constraints and labor shortages and how you can optimize your business outcomes.

    Manage Complexity and Compliance in Emerging Automotive Engineering

    March 22, 2022
    Automotive IQ/IBM ELM

    Develop complex systems and fastrack ASPICE, functional safety and cybersecurity compliance requirements with IBM Engineering Solution. Fastrack development by leveraging the IBM ELM compliance solution to ensure compliance becomes a part of your daily development process.

    Webinar Series: Next-Generation Smart Manufacturing

    Addressing the Challenges in Battery and Electrical Systems Manufacturing for EVs

    March 22, 2022
    SAE/Siemens

    The many challenges in EV manufacturing initiatives are explored in this webinar series, which consists of six sessions on topics that examine manufacturing trends to address electrification, additive manufacturing, intelligent supply chain, and operational excellence.

    Be Ready for What's Next: Industry Insights and the EV Customer

    March 22, 2022
    Automotive News/Google

    Learn what Google data indicates about the future of automotive and how to prepare. You'll also hear what Google research says about the ever-growing electric-vehicle shopper and what they want to hear from you.

    The Software-Defined Vehicle: Key Drivers, Technologies, and Open Source Initiatives

    March 23, 2022
    CAR/Red Hat

    In the Software-Defined Vehicle, solutions are developed reaching from the vehicle to the cloud with an integrated DevOps approach. Software, data, hybrid cloud architecture, edge computing, and artificial intelligence are key competencies to fulfill the ACES requirements.

    How Adaptive AUTOSAR Solves Complexity in Automotive with High-Performance Computing

    March 23, 2022
    SAE/Elektrobit

    Experts share the benefits and best approaches for implementing standardized Adaptive AUTOSAR. An audience Q&A follows the technical presentation.

    How to Achieve the Right Sound (and Vibration) in Electrified Vehicles

    March 23, 2022
    Mobex/VI-grade

    There are numerous challenges to overcome when trying to achieve the optimum sound and vibration levels in EVs and hybrids, both inside and outside the vehicle.

    From Optimization to Uncertainty Quantification Through Machine Learning

    March 24, 2022
    SAE/SmartUQ

    An introduction to machine-learning-based UQ and emulation and their benefits to optimization. Examples are used to highlight the additional benefits of such an approach over more basic optimization techniques.

    Data-Driven Autonomous Vehicle Testing

    March 24, 2022
    Mobex/Sasken

    It is becoming increasingly difficult and expensive for autonomous vehicle (AV) makers to conduct testing in the physical world due to the increasing automation levels and complexity.

    The Automotive OS - What Is It, Why Do I Need It, and What Does it Take to Build and Operate It?

    March 28, 2022
    Mobex/Elektrobit

    Learn how an automotive OS differs from established middleware solutions like AUTOSAR, and discover how an automotive OS influences the development and maintenance of software

    How to Accelerate from Assistance Systems to Automated Hub-to-Hub Transportation

    March 29, 2022
    Mobex/AVL

    How to transfer controls features for driver assistance systems into features for vehicles with higher automation levels.

    Shorten Electric Vehicle Development Cycle Using NI and AVL Virtual Testing Solution

    March 29, 2022
    SAE/AVL/NI

    Automotive test engineers focused on electric powertrain development want to shift testing to simulation earlier in the development process, decreasing dependence on costly dynamometer and field testing.

    The Heavy Impact of Lightweighting - A Roundtable Discussion

    March 30, 2022
    CAR/Altair

    The panel of speakers will discuss how technology advancements have advanced the impetus for vehicle lightweighting and its importance as it supports organizational sustainability goals and the automotive industry overall.

    Making Intelligent Speed Assistance Easy - A Guide for OEMs

    March 30, 2022
    Mobex/NNG

    From July 2024, every new vehicle sold in the EU must be equipped with Intelligent speed assistance (ISA). Mandatory hardware and update costs can make this transition seem complicated and expensive.

    Improving EV Battery Performance with Customized Lithium-Ion Battery Binders

    March 31, 2022
    Mobex/Trinseo

    Experts discuss how customized lithium-ion battery binders can impact the anode coating properties, cell manufacturing processes, and battery performance.

    top

    Available through February 2023

    The Toyota Mirai 2 FCV - A Serious Competitor to State-of-the-Art BEVs?

    February 1, 2022
    Mobex/AVL

    Evaluate the Mirai 2's fuel cell technology and overall performance and discuss how it measures up to its rivals and state-of-the-art BEVs.

    Ultra-Fast Charging System for Electric Urban Delivery Vehicles

    February 2, 2022
    Mobex/Mahle

    A low storage-capacity battery pack that utilizes a novel battery cell technology to enable vehicles to recharge fully in just a few minutes, eliminating the need for a large battery pack and making it ideal for urban delivery applications.

    Keeping the “Driver” in Driver Assistance Systems

    February 16, 2022
    CAR

    The automotive industry is moving ahead with advanced driver assistance features, including partially automated systems that should make driving safer. These Level 2 systems still require constant supervision by the driver. The challenge is keeping drivers engaged while using these systems. Driver monitoring systems should help this situation but might be encouraging the wrong behavior because of some of the current implementations.

    How to Build an Automotive Cybersecurity Incident Response Team

    February 16, 2022
    Mobex/ESCRYPT

    The number of cybersecurity product vulnerabilities increases yearly, along with the risk of security incidents. This has created demand for an end-to-end vulnerability management and incident response process cycle and is reflected in the new requirements from the UN R 155 and ISO/SAE 21434 regulations and standards.

    Accelerate Electric Vehicle Engineering with Simcenter Digital Twin

    February 17, 2022
    SAE/Siemens

    What will it take for a company to become a technology leader and bring electric vehicles that deliver the desired drive range, performance, and comfort quickly and cost-effectively? A digital twin approach with Simcenter using model-based engineering and integrated processes for design, simulation, optimization, and verification can help you make the right engineering decisions.

    Strategies to Maximize Greenfield EV and Battery Plant Launch Success

    February 22, 2022
    Charged/Rockwell Automation

    How to mitigate your EV and battery plant launch risks by focusing on seven key areas of value, from planning, design and integration—all the way to launch and optimization. Learn how to get to market faster with reduced capex and operational costs, prioritizing agility and scalability in your plant.

    Environmental Protection Agency Electric Vehicle Certification and Range Measurement

    February 24, 2022
    Mobex/UL

    The current United States federal test requirements for light-duty electric vehicle (EV) range and energy consumption and how EVs have a distinct advantage in governmental compliance.

    Innovative Material Solutions for Electric Vehicle Charging Infrastructure

    February 24, 2022
    Mobex/BASF

    Charging infrastructure components for eMobility must exhibit excellent mechanical performance while providing UV and stress-cracking resistance and glossy or translucent surfaces to meet high demands in design.

    top

    Available through January 2023

    The Future of Mobility: Get Up to Speed

    January 6, 2022
    Automotive News

    Software-defined vehicles and advanced network services are revolutionizing the automotive industry, including how new car platforms are designed and built. How can enhanced connectivity advance productivity, collaboration, safety and efficiency in the automotive ecosystem?

    Platform to Accelerate your xEV Powertrain Strategy

    January 12, 2022
    Mobex/KPIT

    A hybrid electric powertrain has better fuel economy and a lower environmental impact than a traditional ICE. However, hybrid electric powertrain systems face significant technical challenges due to rapidly increasing system complexity due to its many subsystems. Vehicle manufacturers and their suppliers can employ a system engineering-based approach to develop and optimize their xEV powertrain strategy and shorten the development cycle.

    The Road Ahead: U.S. DOT's AV Policy and Priorities In 2022

    January 12, 2022
    PAVE/US DOT

    During its first year, the Biden administration spotlighted several issues related to driving automation technology, from new crash reporting rules to warnings about the need for drivers to remain attentive while using driver assistance features. This webinar discusses the administration's first year in office, their goals and priorities for the year ahead, and the importance of education in preparing for the autonomous future.

    Introduction to Measuring Power Losses in Motors and Inverters

    January 19, 2022
    Charged/HBK

    The battery life of a device is crucial for the adoption of more electric devices. One of the main drivers for improving battery life is minimizing losses in the power conversion. Review the basic sources of losses in electric machines and how to measure them. Including whether or not you can trust a loss measurement.

    Assembly Automation for Automotive Electronics

    January 20, 2022
    Mobex/Manz

    Discusses the challenges of high-volume automotive electronics assembly and the increased opportunities for laser welding to replace fastening or other welding technologies.

    Revolutionary Metal Injection Molding Technology for Cost-Effective Automotive Part Production

    January 24, 2022
    Mobex/BASF

    Presents a revolutionary metal injection molding feedstock that enables cost-effective production of geometrically sophisticated devices in large quantities and on conventional machines.

    How to Accelerate from Assistance Systems to Automated Hub-to-Hub Transportation

    January 25, 2022
    Mobex/AVL

    Explains how to transfer controls features for driver assistance systems into features for vehicles with higher automation levels, and how to utilize a modular and scalable software and controls architecture to make this transition as efficient as possible.

    X-Ray CT Solutions for Lithium-Ion Battery Production

    January 26, 2022
    SAE/Nikon

    Examines a CT solution that provides fast, inline inspection. Its unique capabilities include a microfocus rotating target, helical CT, half turn CT, and offset CT, which allow many assembly processes to be quickly inspected including electrode condition, delamination, deformation, overhang measurement, foreign matter contamination, and welding defects.

    Innovative Inverter Technology for Motor Control Software Development and Rapid Deployment

    January 26, 2022
    Mobex/Drive System Design

    Explains how the Open Platform Inverter (OPI) enables the fast and efficient development of motor control systems from initial concept to production.

    Commercial Vehicle Propulsion: Hydrogen's Potential to Fuel a Revolution

    January 27, 2022
    SAE/FEV

    Hydrogen is fast emerging as a promising substitute for fossil fuels, as truck OEMs, engine manufacturers, and suppliers accelerate the development and launch of hydrogen-fueled commercial vehicles. While fuel cells tend to dominate the discussion, hydrogen combustion engines also are advancing to proof-of-concept testing on their path to production.

    NVH Aspects of Electric Drive Unit Development and Vehicle Integration

    January 27, 2022
    Mobex/FEV

    Experts from FEV discuss a host of EV-specific NVH considerations, ranging from occupant comfort to pedestrian safety across a full complement of on-road vehicles.

    top

    Available through December 2022

    Agile Powertrain Engineering: Maintaining Quality in the Face of Increasing Complexity

    December 1, 2021
    Mobex/MAHLE

    Change is the only constant, yet to share our learning and make the most of these changes, we must develop and use stable business processes and automated tools.

    The Future of Agile Software Development and Validation for Autonomous Vehicles

    December 1, 2021
    Mobex/dSPACE

    A solution that uses scenario-based testing, physics-based vehicle and sensor simulation, open standards, and cloud/SaaS technologies, providing massive scalability and directly supporting CI/CD processes.

    Creating a Seamless Electric Vehicle Experience for the Mass Market

    December 6, 2021
    Mobex/Hubject

    Electric vehicles have reached the tipping point in their transition from niche to mainstream, and stakeholders must now cater for the mass market rather than a small number of early adopters.

    Steel E-Motive: Vehicle Structures for Autonomous Mobility as a Service

    December 7, 2021
    Mobex/Ricardo

    Showcases the vehicle technical specifications and expectations for steel innovations, and outlines innovations in the progression of key component structures.

    Speed Your Development of Safe ADAS Features and Autonomous Driving

    December 7, 2021
    Automotive IQ/Ansys

    To meet rigorous safety standards, automotive, truck and off-road OEMs and suppliers must test complex interactions between ADAS features, only simulation can bring AVs to market in our lifetime, which is why many OEMs depend on technologies that test, validate and virtually experience AV performance.

    Shaping eMobility with Holistic Polymer Solutions

    December 8, 2021
    Mobex/BASF

    Presents new material trends and specifications that are becoming key performance factors for electrified powertrains.

    New Poll: How have Public Attitudes on AVs Changed?

    December 8, 2021
    PAVE

    In this panel, we'll chat with the authors of the survey to discuss what they found, how public attitudes have changed, and how the results could inform educational practices about automated technologies.

    Future Trends in HSM-Driven Automotive Cybersecurity

    December 9, 2021
    Mobex/ESCRYPT

    Future market trends and requirements regarding the HSM in the automotive cybersecurity domain towards next-generation vehicle E/E architectures. Specifically, the colleagues address how the HSM can realize virtualization and hardware acceleration for high-end microcontrollers.

    ShyTech Displays: the Beginning of a New Era of Puristic Vehicle Design and Enhanced UX

    December 13, 2021
    Mobex/Continental

    Automakers are increasingly adopting larger, more immersive in-vehicle displays to provide the driver with the most exciting user experience possible. However, these modern displays can sometimes be overly dominant, leading to problems such as driver distraction.

    Lubricant Components for E-Fluids

    December 14, 2021
    Moobex/BASF

    Lubricant technologies for electric vehicle applications designed to meet and exceed requirements like high thermal resistance, copper corrosion protection, good electrical properties, and compatibility with new metal/plastic materials.

    Simulation and Testing: The Driving Forces for Engineering the Vehicle of the Future

    December 15, 2021
    SAE/Siemens

    By making better use of simulation models in model-based development and effectively combining test and simulation, vehicle engineering teams will be able to deal with the challenges of tomorrow while keeping under control both quality and brand values as well as time and cost.

    How Modern Adhesives are Enabling the Mobility Revolution

    December 15, 2021
    Mobex/Dow

    Explains how modern automotive sealants have evolved with the market to enable the mobility revolution and demonstrates a breakthrough RTV technology, which facilitates higher throughput with best-in-class durability.

    Metal-to-Composite Conversion with Injection-Molded Long Fiber Reinforced Thermoplastics

    December 16, 2021
    SAE/Avient

    Tried and true metals deliver structural performance but have limitations that often push engineers to consider substitutes. Whether you need to reduce weight, gain greater design flexibility, or lower manufacturing costs, long fiber composites are the go-to thermoplastic material for structural applications.

    top

    Available through November 2022

    Operational Safety Assessment Metrics for Automated Driving System-Operated Vehicles: SAE J3237

    November 3, 2021
    SAE/Exponent Inc/IPG Automotive/Keysight Technologies

    This webinar focuses on the need for OSA metrics for AVs, starting with an introduction to the SAE J3237 document as well as how its included metrics will fit into an overall OSA methodology and safety case framework. This will be followed by a panel discussion.

    Overcoming Software and Hardware Development Challenges in the New Mobility Era

    November 3, 2021
    Mobex/Tuxera

    Examines today's software and hardware development challenges and identifies ways to mitigate the associated risks.

    How to Improve the Accuracy of Material Simulations when Designing for Weight Reduction

    November 4, 2021
    Automotive IQ/Shimadzu

    Introduces testing and measuring techniques to accurately measure material properties required to improve the simulation accuracy of composite materials (CFRP) and press forming (high tension steel).

    Latest Enhancements for ADAS Sensor Testing and Simulation

    November 4, 2021
    SAE/VI-grade/Siemens/dSPACE

    As sensor makers and integrators scramble to reduce cost and complexity while simultaneously enhancing performance, a new importance has been placed on testing and simulation to validate design parameters and improve speed to market. Experts discuss new practices and enablers for all aspects of sensor simulation and testing.

    Adhesives and the Future of Battery Designs

    November 9, 2021
    SAE/DuPont

    Adhesive bonding provides significant advantages for EV battery assembly by contributing to lean manufacturing processes, improved long-term durability, and crash resistance. Adhesives also contribute to improved thermal conductivity, faster charging processes, and durability – all of which help improve driving comfort and customer experience.

    Simple Steps to Automotive Software Compliance

    November 10, 2021
    AutomotiveIQ/Perforce

    Ensure, enforce, and verify compliance at every stage of automotive software development. Join our panel of automotive software development experts to learn how to efficiently ensure automotive software compliance.

    Next-Generation Aluminum EV Battery Enclosure Solutions

    November 15, 2021
    Mobex/Novelis

    Presents an innovative aluminium EV battery enclosure solution that addresses the stringent safety and efficiency requirements of modern, high-volume electric vehicle platforms.

    Trends, Material Solutions, and Industrialization Concepts for Front and Rear Automotive Panels

    November 17, 2021
    SAE/SABIC/ENGEL

    Automotive plastic producer SABIC and plastics machine-maker ENGEL combine their knowledge and experience to provide insights on the evolution of an emerging application space – front and rear exterior panels on vehicles.

    ECU Design for Functional Safety, Cybersecurity, and AUTOSAR™ Compliance

    November 17, 2021
    Mobex/NXP

    Functional safety, cybersecurity, and AUTOSAR compliance are now standard requirements when designing with modern automotive ECUs. This webinar explains why designing for each requires a familiarity with the relevant standard and an understanding of the embedded hardware and software components available for implementation.

    Addressing MLCC Performance Issues in High-Voltage EV Applications

    November 17, 2021
    Charged/Knowles

    How EV engineers can address DC bias and self-heating issues from AC ripple in multi-layer ceramic capacitors. MLCCs are an excellent capacitor option for the high-power electrical systems needed in electric vehicle (EVs) due to their small physical size, low inductance, and ability to operate at higher temperatures.

    Winter is Coming: How AI Predicts Slippery Road Conditions and Enables Automated Driving

    November 18, 2021
    Mobex/Continental

    Presents a general introduction to the technology and explain how to leverage it to predict upcoming road conditions. The experts will also explain how to turn data sources like weather forecasts into relevant information for drivers and vehicles.

    Vehicle Battery Test Centers: What We Have Learned So Far

    November 23, 2021
    Mobex/FEV

    As one of only a few players in the world to both build and operate vehicle battery test centers, FEV has gained significant insight into the creation and ongoing optimization of such facilities.

    Tying WP.29 Cybersecurity Requirements to Mitigation Verification Testing

    November 23, 2021
    Mobex/Keysight Technologies

    Automotive cybersecurity is becoming increasingly important. Beginning in July 2022, UNECE WP.29 UN R155 will be required for all new vehicle type approvals.

    How to Accelerate from Assistance Systems to Automated Hub-to-Hub Transportation

    November 24, 2021
    Mobex/AVL

    Explains how to transfer controls features for driver assistance systems into features for vehicles with higher automation levels, and how to utilize a modular and scalable software and controls architecture to make this transition as efficient as possible

    Test Approaches for eDrive

    November 24, 2021
    Mobex/dSPACE

    How to test complex, high frequency and voltage controllers and provides insight into how major engineering companies verify and validate.

    Scaling Up Virtual ECU Testing and Validation

    November 25, 2021
    Mobex/AVL

    Experts explain how virtual MiL and SiL integration environments can replace traditional vehicle integration and HiL tests. The experts also discuss how software verification, system optimization and functional safety tests can be performed in a consistent and open development process, from software system design to large-scale virtual validation in the cloud.

    top